EN
Many electromechanical devices require compact panel-mount switches for signal switching. In addition to basic electrical parameters, vibration resistance and operating temperature range directly affect the long-term reliability of the equipment.
During procurement selection, it is also necessary to distinguish between two different operating structures: self-locking and momentary triggering. The following is a detailed introduction to two switch products: T600 and T601.
Similarities between the T600 and T601 series
1.Rating value：2A 250VAC/4A 125VAC
2.Mechanical life：50,000 Cycles Min
3.Electrical life：20,000 Cycles Min
4.Operating force：≤24N
5.Contact resistance：≥100MΩ（Min）
6.Ambient temperature：-25℃~+80℃
7.Humidity：85%Rh Below
8.Dielectric strength：1,000V RMS (Min)
9.Vibration: 10‑55Hz, 1.5mm Double Amplitude
10.Certifications: CE and RoHS compliant
Functional Features and Operation Modes of Each Product
T600 series：
Number Of Poles：Single Pole and Double Pole
Switch Function：ON-OFF，ON-ON，(OFF)-ON （Normally closed），OFF-(ON) （Normally open）
Terminal：Solder and Pre-wired (wire length 160mm)
Operation method: Use the toggle lever to switch
Applicable scenarios: internal electronic control panels of garden machinery, small electromechanical equipment, used for signal switching in dry indoor environments, not for outdoor rain-exposed locations.
T601 series:
Button Selection：Plastic Button， Metal Button，Plastic Button
Switch Function：OFF-(ON) （Normally closed），ON-(OFF) (Normally open)
Terminal:Solder,Pre-wired (wire length 160mm)
Button Color:Red, Yellow,Black,Green,Blue
Operation method: triggered by pressing the button.
Applicable scenarios: reset buttons on the internal control panels of small garden machinery and industrial control equipment panels.
Conclusion & Notes
Tip: Both models are non-waterproof low-current signal switches. The device's own panel casing needs to be protected and must not be directly exposed to rain or water ingress.
Overall, the T600 and T601 series share the same electrical performance, environmental tolerance, and installation accessories, with differences mainly in the operating head structure and working logic. The T600 has a self-locking lever, while the T601 features a momentary button. Both series are non-waterproof low-current signal switches. When selecting, the actual operating requirements of the equipment should be considered, and parameters such as the number of poles, terminals, button material and color should be confirmed. At the same time, proper protection of the overall device enclosure should be ensured, avoiding exposure to rain and moisture, so as to fully leverage the switch performance and reduce later equipment failure and maintenance costs.
If you are interested in our products and would like to learn more details, please feel free to contact me.
TEL: 0577-62768277-819
Phone: 15058736157
E-mail:[email protected]
QQ:1187838796