EN
TOOWEI T502CTY is an aftermarket replacement option for JLG 4360331 applications requiring a DPDT ON-OFF-ON toggle switch with six 6.3 mm quick-connect terminals. It combines three maintained positions, a yellow plastic handle, and the T500 panel-mount design. For buyers comparing replacement switches, the key starting points are the switching function and terminal connection.
This configuration is intended for a circuit that needs the lever to stay in the selected position. It should be distinguished from a spring-return switch, even when the housing, handle, and terminal count look similar.
T502CTY Technical Specifications
| Specification | TOOWEI T502CTY |
|---|---|
| Product series | T500 |
| Circuit | DPDT |
| Function | ON-OFF-ON |
| Positions | Three maintained positions |
| Terminal count | Six |
| Terminal connection | 6.3 mm quick-connect |
| Handle | Yellow plastic |
| Panel cutout | 12 mm |
| Standard mounting thread | M12 × 1 |
| Published AC rating | 15 A 250 VAC / 20 A 125 VAC |
| Protection | IP67 |
Why Maintained ON-OFF-ON Matters
DPDT means that one lever operates two switching poles. Each pole has a common connection and two selectable contact paths. At center OFF, both paths are open; at either end position, the corresponding paths are selected.
With maintained operation, releasing the handle leaves it in that position. A momentary (ON)-OFF-(ON) switch returns to center when released. These actions serve different control requirements, so a three-position replacement must be selected by its contact function rather than by appearance alone.
The C function code in T502CTY identifies ON-OFF-ON. The T identifies quick-connect terminals, while Y identifies the yellow handle. Using the complete model number helps keep the quotation, sample and production order aligned.
Six Quick-Connect Terminals for Harness Connection
T502CTY uses six blade terminals for compatible female quick-connect connectors. Compare the original connector dimensions, terminal spacing and available rear clearance with the replacement drawing.
Identify the common contacts from the contact diagram and preserve the required circuit orientation. Six terminals establish the connection count; they do not establish an identical pin assignment across different manufacturers.
JLG 4360331 and the 4360331S Search Reference
Buyers may encounter both 4360331 and 4360331S in parts searches. JLG's official 4360331S listing, checked on October 12, 2026, identifies a DPDT switch for access equipment. When requesting a replacement, provide the exact number on the original part or equipment parts list, together with its operating action and rear-terminal photo.
Panel Protection and Load Selection
The specified T500 configuration provides IP67 protection above the mounting panel. The quick-connect terminals sit behind the panel and require suitable enclosure protection.
The published AC ratings describe the TOOWEI product. For a DC control circuit, provide the voltage, current and load type so the appropriate electrical specification can be confirmed.
Request a T502CTY Sample or Quotation
Contact TOOWEI with the 4360331 reference, original switch photos and required quantity. Specify T502CTY, DPDT, maintained ON-OFF-ON, six 6.3 mm quick-connect terminals, yellow handle. Request the contact diagram and dimensional drawing with the sample.
See the T500 series toggle switches for other circuit and terminal configurations.
This is an independent TOOWEI aftermarket product. JLG names and part numbers identify the reference application and do not imply OEM manufacture or endorsement.
